Log Entries - Chapter 17

DateChapterDescriptionHours
Sun 7/18/04 17 Made CZRT-1. Test fit CZRTH and all hardware. 1
Tue 4/26/05 17 Cut out CZRT-3 from plywood. Cut tubing. Test fit all. Marked thigh supports for roll trim cable location. 3
Thu 4/28/05 17 Used 5-minute epoxy to attached tubing to CZRT-3's. Notched front thigh supports for roll trim cables. 1
Sun 5/1/05 17 Began designing and making mounting frame for landing light. 4
Mon 5/9/05 17 Added and trimmed UNI on CZRT-3's 1
Sat 5/14/05 17 Floxed CZRT-3 into place and taped. 1
Mon 5/30/05 17 Cut hole in fuselage bottom for landing light. 1
Tue 5/31/05 17 Finished cutting hole to shape in fuselage bottom for landing light. 1
Chapter Total 13